Good British Car Parts

MGB Parts for Sale   

 

Interior:

 

Dashboard - Very nicely refurbished; 1968 - 1971; beautiful natural burl synthetic woodgrain dash facing (medium dark); new top cap unopened in Moss package (I will install it if you prefer); refurbished console available (below) with matching burl facing; my regular price $394.95 but I only have this one remaining; NOTE: second picture shows new dash cap still in unopend Moss package (includes glue)  - 299.95 

 

  

 

Console - 1968-1971; Matches dash above; very nicely refurbished; beautiful natural burl synthetic woodgrain dash facing (medium dark); new top cap unopened in Moss package (I will install it if you prefer); refurbished dash available (above) with matching burl facing; my regular price $89.95 but I only have this one remaining  - 74.95

 

 

Dashboard - Used; 1962 – 1967; Very nicely refurbished in black crinkle paint; beautiful natural burl synthetic woodgrain dash facing; refurbished console available (below) with matching burl facing; my regular price $394.95 but I only have this one remaining - 299.99 

 

Picture to Be Attached Soon

 

Dashboard - Used; 1972 – 1976; slightly damaged on sides; newish capping; NOTE:  I will refurbish and apply woodgrain facing for additional $200; as is - 19.99 

 

Picture to Be Attached Soon

 

Center Tunnel Console(1972 – 1980); nicely restored with special plastics finish – shiny black, looks like has Armor-All finish); Moss Motors price is $109.95; includes new Moss $13.95 Boot retainer ring; total value if all new is $123.90; does NOT include lid, lid hinge, ashtray, latch clip -74.99

 

Picture to Be Attached Soon

 

Door Panel – Driver’s Side (1977-1980 style, but will fit 1970 - 1980); used but in VERY GOOD condition); has a 22” hard plastic map pocket running along the base to meet the needs of minimal storage in MGB interiors; includes square flip-down cup holder (between door opener and window crank); does NOT include door capping, armrest, door opener, or window crank; does NOT include pre-mounted speaker (will consider selling for $10) - 29.99 ea

 

 

Door Panel – Passenger’s Side - 1977-1980 style, but will fit 1970 - 1980; used but in GOOD condition; NOTE:  I will remove show insignia and clean off "sticky" residue; includes square flip-down cup holder (between door opener and window crank); does NOT include door capping, armrest, door opener, or window crank; does NOT include pre-mounted speaker (will consider selling for $10) - 29.99 ea

 

 

Rear Cockpit Interior Panel Kit - Very good condition; for late model MGB (from 1977-1980, but will fit 1970-1980; used but in VERY GOOD condition) - 39.99

 

Leatherette-Covered Wood Door Capping - Used; fair condition, but very useable; chrome in nice shape; leatherette fabric has few cracks near window (not visible from interior, but can see them when standing) - I have set of brand new black leatherette fabric door capping coverings available for $3.99 each) - 9.99 ea

 

Leatherette for Door Cappings - New black leatherette fabric door capping coverings available for $5.00 each ) - 3.99 ea

 

Wood Door Capping - Used; very poor condition; needs new foam & fabric, available at LBCarCo; some peeling on chrome) - 1.99 ea

 

Clock - Used; unknown condition; probably for 1972 – 1980 - 9.99

 

Horn Push - Used; restored to good condition; 1971 – 1976; also 1977 – 1980 LE -  3.99

 

Center Air Vents - 1972-1976; used, very good condition; no longer available from Moss Motors - 24.99

 

 

Courtesy Light - 1972-1976; used; 1972 – 1976; chrome fair with very slight pitting - 7.99

 

Glove Compartment Door (used; 1975 – 1976; very nice condition) - 39.99 

 

Glove Compartment Interior “Bucket” (used; 1975 – 1976; very nice condition) - 19.99 

 

Interior - Dashboard Kits:

NEW Dash Kits (Real Wood, Synthetic Woodgrain, Metal, High-Tech, Colored Vinyl, Etc.) for 1962 - 1980 MGB:
  
These are beautiful laser-cut kits in a variety of beautifully-done synthetic wood grains:  Numerous burls, zebrona, ebony, Japanese cherry, rosewood, polished aluminum, carbon fiber, & some natural ones - see swatches at the bottom of this page and the pictures to the side and bottom of this write-up.  They fit perfectly around gauges and dash features and have pre-adhesive backings that make them very easy to apply.  It took me about 20 minutes to install and has been on almost two years with no lifting.  They have a specially-formulated, ultra-hard finish to protect them from the weather and everyday scratches.

 

219.99 - 259.99 (plus $20 shipping).  See swatch samples and ordering information on the link:   MGB Dash Kits

   Engine & Engine Compartment:

     Intake Manifold for HS4 Carbs -  24.99

Carburator stand-offs for HS4 Carbs -  6.99 each

 

 

Heat Shield for HS4 Carbs 9.99

 

Shaft for Rocker Assembly - Used; disassembled; from working engine - 3.99 ea

 

Individual Rockers - Used; disassembled; from working engine - 3.99 ea

 

Rocker Arm Assembly - Used; from working engine - 29.99

 

Water Pump Pulley (used; 1977-1980) – 6.99

 

Water Pump Pulley (used; 1975 – 1976) - 6.99

 

Camshaft (from working engine; 103K miles; grindable?) - 8.99

 

Timing Gear Good shape; from working 5-main engine; 103K miles) - 7.99

 

Under Hood Insulation Useable shape (one edge frayed a bit; could be trimmed) - 3.99

 

Drive Train:

 

Transmission Cross Member (1968 – 1980l; good condition; recommend changing transmission mounts ANY time you remove tranny - 29.99

 

 

 

Fuel System: 

 

Fuel Pump (used (had about 2,000 miles use); good shape, but was erratic; points cost around $10 (from Victoria British, Moss Motors, NW Auto Imports) to rebuild this unit) - 19.99

 

Fuel Line Hose Clamps (set of original style; NEW) - 0.50 cents ea 

 

Wheels-Brakes-Suspension: 

 

One RoStyle Wheel with Useable Tire - Appears straight; not rusted; could use paint;  comes with decent tire; would make good spare - 29.99

 

Chrome Lug Nuts (used; full set; condition varies, fair to good condition) -  0.50 ea 

 

Body & Body Trim:

Rear License Plate Holder & Side Lights (used; late model with black finish on side lights; refinished; nice condition) - 19.99

 

Front License Plate Holder - Used; late model with black finish on side lights; refinished; repaired dent (covered by license plate) - 8.99

 

 

Jack (damaged gear; doesn’t work; for appearance only; very nice looking - nearly "show" appearance) - 19.99

 

See Some of These Parts:

 

Pictures of some of these parts are at this location:

 

http://community.webshots.com/album/568706055npThsW

 

I also have some 65-80 Midget & Sprite parts for sale - go to this location Midget & Sprite Parts

  Click Picture or Underlined Link Below to Go to Website

Here are some truly great scale models from the small 1:43 to the authentic 1:32 to the very detailed 1:24 & the huge 1:18 size.  See and BUY:

 

Scale Model Diecast

 

Cars (late 1800’s - modern), pickups, highway freighter trucks, fire trucks, buses, motorcycles, construction & excavation equipment, airplanes (fighters, bombers, & civilian), ships (naval, passenger, & transport), military (tanks, tracked, jeeps, humvees, figurines, & other), other types of vehicles, general transportation-related (buildings, gas pumps, signs, & figurines), trains & railroad paraphernalia, display cases, hood ornaments, watches, clocks, automobilia, and many other items.

Read about club activities, buying & restoring a British car, how to "performance build" a car engine, and other topics on:

British Cars Restoration & Performance

 

Thanks for viewing

British car parts

 

 

You can see more about these cars at my website:

Barry's Classic Cars

Here are some of the tools we use to build and maintain our website, to have it hosted, and for search engine optimization (SEO):
 
For Website Building:
 
For Website Hosting:
Bravenet250
 
 
For Search Engine Optimization:

Click to View Model Cars